Installation Guide | Auto Parts Installation

This guide provides general instructions for installing common automotive replacement parts. Always use appropriate tools and follow vehicle safety guidelines before performing any installation.

---

🚗 Bumper Grille Installation

✔ Step 1: Park the vehicle on a flat surface and turn off the engine
✔ Step 2: Remove screws, clips, or fasteners from the existing grille
✔ Step 3: Carefully detach the old grille
✔ Step 4: Align the new grille with the mounting points
✔ Step 5: Secure using original clips or screws
✔ Step 6: Check alignment and tighten all fittings

💡 Ensure all clips are properly secured for correct installation.

---

💡 Headlight Replacement

✔ Step 1: Open the hood and locate the headlight assembly
✔ Step 2: Disconnect the vehicle battery
✔ Step 3: Remove mounting screws or bolts
✔ Step 4: Disconnect wiring harness carefully
✔ Step 5: Install the new headlight unit
✔ Step 6: Reconnect wiring and test functionality

💡 Avoid direct contact with the bulb glass.

---

🔧 Side Mirror Installation

✔ Step 1: Remove interior door panel if required
✔ Step 2: Disconnect electrical connector (if applicable)
✔ Step 3: Remove the existing mirror
✔ Step 4: Position the new mirror
✔ Step 5: Secure all screws properly
✔ Step 6: Reconnect wiring and test adjustments

💡 Ensure proper alignment before final tightening.

---

⚠ Safety Notes

✔ Use proper tools during installation
✔ Follow manufacturer guidelines
✔ Wear safety equipment when necessary
✔ Professional installation may be required depending on the vehicle

---

💬 Support Assistance

If customers face installation issues, they may contact customer support for general guidance.

 

Keya Auto
1209 Mountain Road PL NE, STE R
Albuquerque, NM 87110, USA